Control System Lab Trainer

Product Code: 3511796

Control System Lab exposes students & industry professional to the fundamentals of Control System. Studies include how one device can be used to manage, command, direct, or regulate the behavior of other System Open Loop control & Close Loop control .
Trainer has various parts like Temperature Sensor, Light Sensor, DC Motor, Servo Motor, LED lamps, IR Sensor, Relay SPST, Relay DPDT, de-bounce Switch, LED bar, Buzzer etc., which can be used for study of Control System. Process can be controlled using P, PI & PID control system There are a wide range of experiments that can be performed on the platform. Control System Lab is also compatible with Data Acquisition System. DAQ is very useful for sensing and controlling analog and digital signals of any process. It makes easy and interesting to interface real world signals with PC/Laptop through USB bus. For ease of connection it has screw terminals.
Features    
•     Open Loop Control System
•     Close Loop Control System
•     On board Temperature Sensor and heater
•     Feedback concept
•     P, PI & PID Control System using software
•     External DC Motor with encoder
•     On board LED lamp and Light Sensor
•     On board Buzzer for Alarm
•     On board Infrared Sensor
•     On board Relay interface
•     On board LED bar display
•     On board Servo Motor control
•     DC Motor speed control
•     Light intensity control
•     V/F, F/V & V/I conversion
•     Breadboard for circuit design
Data Acquisition System
•     4 Analog Input (ADC) channels
•     1 Analog Output (DAC) channels
•     1 PWM Output
•     22 Digital Input and Output channels
•     10-bit ADC resolution
•     Data logging facility
•     USB interface
•     Two unity gain given to strengthen the weak signal from any
Sensor    
•     Removable screw terminals for easy signal connectivity
•     Exhaustive course material & references
Scope of Learning
Study & observe:    
•         Voltage to Frequency converter
•         Frequency to Voltage converter
•         Characteristic of Photoconductive cell(LDR)
•         Motor speed & input characteristics
•         Position control of Servo Motor
Study & implement:
•         Light intensity control using PWM method
•         Bidirectional Motor speed control
•         Tachogenerator using F/V converter
•         Motor control using PWM method
•         Open-Loop DC Motor control
•         Closed-Loop DC Motor control
•         Speed of a DC motor using P, PI & PID controller
•         Open-Loop Temperature control
•         Closed-Loop Temperature control
•         Temperature using P, PI & PID controller
•         Open-LoopL Light intensity control
•         Closed-Loop Light intensity control
•         Study & Control Light Intensity using P, PI & PID controller
Technical Specifications
Operating Voltage    : +5V, - 5V, +12V, -12V
Servo Motor    : +5VDC
DC Motor    : +12VDC
Temperature Sensor    : 10mV/0C
Light Sensor    : Photo Conductive Cell (LDR)
Light Source    : 2 LED's
V/F    : Input 0-5V
Output 0-5 KHz Approximately)
F/V    : Input 0-5 KHz
Output 0-5V (Approximately)
V/I    : 4 to 20mA
Clock Generator    : 0-43.50 KHz
SPST Relay    : +5V
DPDT Relay    : +5V
De-Bounce Switch    : Monostable (5V output)
PWM    : 1 no.
Buzzer    : +5V
Switches    : IR Switch, DIP switch
Test Points    : 25
DAQ Analog Inputs    : 4 Inputs with 10 bit
resolution    
DAQ Analog Output    : 1 Output 10 bit resolutions
DAQ Digital Inputs    : 11 TTL Inputs 
DAQ Digital Outputs    : 11 TTL Outputs 
DAQ Unity gain amplifier : 2 (0V to 10V)
DAQ Frequency Counter : 0 to 6 MHz (Square Wave)
DAQ PC Interface    : USB 2.0
Weight    : 1.5 kg (Approximately)
Mains Supply    : 230V +/- 10%, 50/60Hz 
Power Consumption    : 4VA (Approximately) 
Included Accessories :1 no.
Patch cords    : 12 nos. 
SMPS Power Supply    : 1 no. 
Optional    : Laptop